USA Flag Pin for the 4th of July

This is by no means a new craft idea. As a matter of fact, I can remember making them by the dozens after that tragic day in September 2001.

I do think it is still a great craft idea so that is why I have chosen to share a tutorial for it!

You still have time to make some for favors for your July 4th barbecue!!

Start with 11 safety pins and seed beads in red white and blue

First you need to wind 10 of the safety pins onto the back side of the last pin. You will need to force them around the loop at the end. Be sure that all of your pins are facing the same way as you wind them on. If they are in different directions, the beads will not be placed on the same sides and the flag will not come out correctly.

Add the beads to the pin as shown above, close the pin.

First Pin is: B,W,B,W,B,R,W,R,W,R

2nd Pin: W,B,W,B,W,R,W,R,W,R

3rd Pin: B,W,B,W,B,R,W,R,W,R

4th Pin: W,B,W,B,W,R,W,R,W,R

5th Pin: B,W,B,W,B,R,W,R,W,R

Pins 6-10: W,R,W,R,W,R,W,R,W,R

Wear it with pride for the Red White and Blue!

Check out our other Patriotic Crafts:

4th of July DIY Pinwheels!

Patriotic Flag Craft!

Join our Community of Creativity!

Red, White and Blue Week:

Here at Craftpicks we just finished up our week of Toadstool Crafts! As you can see, some really cute ideas! Click on the pictures below and they will take you to the tutorials for each project!

This week leads up to the Fourth of July here in America so this week we are going to explore the world of patriotic crafts! Today we are going to do a Kid friendly holiday decorationr flag from Popsicle sticks. This project could also we done with paint stirrers to make it larger.

Start with:

10 Popsicle sticks

Red, white, & blue paint

Tacky Glue

Big Bite Hole Punch or drill

Brushes

small star stamp

wire

ribbon

First paint 4 sticks as shown here. Be sure to get the edges but it is not necessary to paint the backs. Put these aside to dry.

Paint the solid red and white sticks and when the blue has dried, paint them as shown above. Let them dry.

Now I used an acrylic stamp and white paint to add the stars. Pour a bit of paint out onto paper and spread it around until it is a thin layer. Press the stamp into the paint and then lift it and look at it to be sure there is no paint on the surrounding area. Then press it onto the wood. Repeat for each star, making sure each time there is only paint on the star portion of the stamp.

Next apply a liberal stream of glue to the two unpainted sticks.

Build your flag and use a paper towel to remove any glue that seeps through your stripes. I then used wire snips to trim the excess wood from the back sticks.